Extending DanTaet Signal Cables

When the meters/valves/liquid sensors are not installed in the vicinity of the DanTaet controller, the signal cables must be extended using a suitable type cable according to this table:

Meter Cable 0-25m:  LIYCY 3 x 0.25mm2 (w/braid) Stock No. 746 3325
Meter Cable 25-50m:  LIYCY 3 x 0.50mm2 (w/braid) Stock No. 746 3350
Meter Cable 50-75m:  LIYCY 3 x 0.75mm2 (w/braid) Stock No. 746 3375
Meter Cable 75-100m:  LIYCY 3 x 1.0 mm2 (w/braid) Stock No. 746 3390
 
Valve Cable 0-25m:  LIYY 3 x 0.25mm2 (w/o braid) Stock No. 746 1200
Valve Cable 25-50m:  LIYY 3 x 0.50mm2 (w/o braid) Stock No. 746 1320
Valve Cable 50-75m:  LIYY 3 x 0.75mm2 (w/o braid) Stock No. 746 1420
Valve Cable 75-100m:  LIYY 3 x 1.0 mm2 (w/o braid) Stock No. 746 1550
 
Liquid Sensor Cable up to 800m:  LIYCY 2 x 0.25mm2 (w/braid) Stock No. 746 3120

 
Note:
 

Do not use other cable type or gauge than required by the actual length!