DanTaet System CSLP

Monitoring
The installation is monitored round-the-clock for seepage. Seepage alarm is issued at a certain time of day, e.g. 10:00am; seepage check may be optionally performed on any day of the week.

Depending on manning, the installation is monitored for constance, average flow, peak flow and discharge. Alarm is issued when consumption exceeds the relevant limit.

Operation
The enclosure is equipped at the front with a key for Alarm Acknowledge/Restart [START] and with a key switch for manned/unmanned site [DUTY ON/OFF].
The enclosure is equipped at the top with an amber lamp that flashes to indicate alarm.
Installation
The enclosure must be supplied with 240Vac 50Hz L-N-PE max 50VA connected to terminals on the intenal base plate. Mains, meter, and valve cables must be routed via the gland block in the bottom of the enclosure. When properly mounted, protection class IP65 is achieved.
Dimensions
Meters and valves for system CSLP come in all sizes from ¾" to DN100.
It is customary to pick the same dimension as the pipework immediately following the meter in order to avoid overloading it.

spacer

system diagram CSLP
1: Enslosure    2: Flow Meter    3: Motorized Valve

System Nom. load m³/h Meter dim. Valve dim.
CSLP-2.5 2.5 ¾" x 220/315 ¾" x 75
CSLP-3.5 3.5 1" x 260/375 1" x 90
CSLP-6 6 1¼" x 260/375 1¼" x 95
CSLP-10 10 1½" x 300/440 1½" x 100
CSLP-15 15 2" x 300/460 2" x 120
CSLP-20 20 DN50 x 270 DN50 x 43
CSLP-40 40 DN65 x 300 DN65 x 46
CSLP-55 55 DN80 x 300 DN80 x 46
CSLP-90 90 DN100 x 300 DN100 x 46

spacer

DanTaet Ltd.
Dryland House
261 Bath Road
Bawdrip, Somerset TA7 8PW
United Kingdom
Ph.: 01278 684984
Fax: 01278 684077
e-mail: dantaet@dantaet.co.uk
web: http://www.dantaet.co.uk/
dantaet logo
spacer